COP Kit- Updated.
Car Model | Toyota Celica ST185 Toyota Celica ST205 Toyota MR2T SW20 Rev1/2 Toyota MR2T SW20 Rev3> |
---|---|
Description | * Updated- This kit now ships with Bosch Coil Packs (4) An after market ECU is required to run this set-up Supplied: - COP Loom - X4 Coil Packs (Bosch)
We supply instructions for this kit along with a base map for using this set-up with the Link G4+ ECU's. The Blue/Brown wire is used for retaining the rev counter * Note- you will receive either a Silver or Black cap for the distributor |
Descrption
* Updated- This kit now ships with Bosch Coil Packs (4)
Coil On Plug Kit for converting your 3SG(T)E engine to a more modern ignition system with individual coil packs per cylinder.
An after market ECU is required to run this set-up, Link G4+, G4X etc.
Supplied:
- COP Loom
- X4 Coil Packs (Bosch)
Please see drop down menus for the additional parts if needed.
We supply instructions for this kit along with a base map for using this set-up with the Link G4+ ECU's.
The Blue/Brown wire is used for retaining the rev counter, since the old coil is removed in this set-up. In addition you can choose the coil pack retaining plate and if you need a distributor aluminium cap which tidies up the install and means you can remove the old plastic distributor cap.
* Note- you will receive either a Silver or Black cap for the distributor, COP Plate- depending on stock levels at time of ordering.
** If using this kit with the Earlier ST185/SW20T Link ecu you will need to purchase Gen2 Patch Loom
Please click Compatibility Tab to see which vehicles this part fits
-
Cam Cover Adapter Plate for COP£166.80
-
Coil Pack£46.80
-
COP Loom£186.00
-
Link G4X ECU pluginAs low as £1,306.80